The 70-412 exam, also named Configuring Advanced Windows Server 2012 R2 Services exam. The 70-412 exam is mainly test on:
1. Configure and manage high availability, this part contains Configure Network Load Balancing (NLB) (including Install NLB nodes, configure NLB prerequisites and upgrade an NLB cluster) and failover clustering, Manage VM movement and failover clustering roles (including continuously available shares; configure virtual machine (VM) monitoring; configure failover and preference settings; configure guest clustering);
2. Configure file and storage solutions, this part contains Configure advanced file services (including NFS/FCI/FSRM), Configure and optimize storage (including iSCSI/iSNS) and Implement Dynamic Access Control (DAC);
3. Implement business continuity and disaster recovery, this part contains Configure and manage backups (including Microsoft Azure backups/VSS/VSSAdmin), Configure site-level fault tolerance (including Hyper-V Replica/Broker and VMs/extended replication, Quorum, etc.) and Recover servers (including BMR/Win RE/BCD store);
4. Configure Network Services, this section contains Implement an advanced DHCP solution/DNS solution, Deploy and manage IP Address Management (IPAM);
5. Configure the Active Directory infrastructure, this section contains Configure a forest or a domain, Configure trusts/sites, Manage Active Directory and SYSVOL replication (including Configure replication to RODCs, configure PRP for RODC and upgrade SYSVOL replication to DFSR);
6. Configure Identity and Access Solutions, this section contains Implement AD FS, Install and configure AD CS, Install and configure AD RMS, Manage certificates.
P.S. Questions on File and Storage Solutions and Identity and Access Solutions (AD FS, AD RMS, etc.) are the most difficult parts of the 70-412 exam!
ATTENTION PLEASE: The 70-412 exam has been updated recently, read new 70-412 exam questions at the end of this post! (Ctrl+End)
The objectives of the 70-412 exam are:
1. Configure and manage high availability (15–20%)
2. Configure file and storage solutions (15–20%)
3. Implement business continuity and disaster recovery (15–20%)
4. Configure Network Services (15–20%)
5. Configure the Active Directory infrastructure (15–20%)
6. Configure Identity and Access Solutions (15–20%)
Read the Microsoft Official 70-412 Study Guide: https://www.microsoft.com/en-us/learning/exam-70-412.aspx
The exam question type of the 70-412 exam are:
1. Single Choice Questions
Single Choice Question Example:
You have DHCP server named Server1 that runs Windows Server 2012 R2. Server1 has two scope production and development. Currently, all DHCP clients register their host name in a dns zone named contoso.com. You need to ensure that only the clients that obtain an ip address from the development scope, register their host name in a dns zone named dev.contoso.com. What should you do?
A. Modify the advanced settings of the dhcp server.
B. Run the set-dhcpserver4scope cmdlet.
C. Modify the dns settings of the development scope.
D. Run the add-dhcpserver4policy cmdlet.
See More Single Choice Questions from 70-412 Exam Dumps (PDF): https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
2. Multiple Choice Questions
Multiple Choice Question Example:
You have server named server-1 which runs windows 2012 R2. Server1 has 3 Iscsi disks named disk-1, disk-2, disk-3. All of the discs are hosted on the same iscsi target. Server 1 has two separate network to the Iscsi target. You need to ensure that the storage traffic from server-1 to the iscsi target is load-balanced across both network connection. Which three actions should you perform in sequence?
A. Run Install-windows feature Enhanced storage
B. Run Enable-MSDSMAutomaticClaim-Bustype Iscsi
C. Run install-windows feature Multipath-IO
D. Run update-IscsiTarget portal
E. Restart server-1
See more Multiple Choice Questions from 70-412 Exam Dumps (PDF): https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
3. Drag and Drop Questions
Drag and Drop Question Example:
Drag and Drop Question
You network contains one Active Directory domain. The domain contains two Hyper-V Hosts named Host1 and Host2 that run Windows Server 2012 R2. Host1 contains a virtual machine named DC5. DC5 is a domain controller that run Windows Server 2012 R2. You configure Active Directory to support domain controller cloning for DC5, and then you shut down DC5. You need to create a clone of DC5 on Host2. What should you run on each Hyper-V Host ? To answer Drag the appropriate commands or cmdlets to the correct Hyper-V hosts. Each command or cmdlet may be used once, more than once, or not at all. You may need to drag the split bar between panes or scroll to view content.
See more Drag and Drop Questions from 70-412 Exam Dumps (PDF): https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
4. Hotspot Questions
Hotspot Question Example:
Your network contains one Active Directory forest. The forest has three sites configured as shown in the following table.
The forest contains the site links configured as shown in the following table.
A domain controller named DC2 has an IP address of 192.168.2.2. DC2 and is in Site2. You run the following cmdlets.
New-ADReplacationSubnet -Name “192.168.3.0/24” -Site Site3
Use the drop-down menus to select the answer choice that completes each statement.
See more Hotspot Questions from 70-412 Exam Dumps (PDF): https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
5. PowerShell cmdlet Questions
PowerShell cmdlet Question Example:
You have 20 servers that run Windows Server 2012 R2. You need to create a Windows PowerShell script that registers each server in Windows Azure Online Backup and sets an encryption passphrase. Which two PowerShell cmdlets should you run in the script? (Each correct answer presents part of the solution. Choose two.)
E. Set OBMachineSetting
See more PowerShell cmdlet Questions from 70-412 Exam Dumps (PDF): https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
Update Note (1):
New 70-412 exam questions were mainly on:
1. iSCSI target;
2. DHCP/DNS zone/Windows Server 2012 R2;
3. Restore Data from backup server to the Server that runs Windows Server 2012 R2;
4. Ways to disable recursion on the Server that runs Windows Server 2012 R2;
5. Verify whether a DNS response from a DNS server is signed by DNSSEC;
6. Microsoft Azure Backup;
7. Other new questions on AD FS/AD CS/AD RMS.
You can get the newest 70-412 exam questions from here:
New questions from 70-412 PDF dumps: https://drive.google.com/open?id=0B-ob6L_QjGLpfm94alk1eU9xWjFYRkVoNkl0cjRiOXZRRjVkUXNXTklicDdKZDJwRGJCM1k
Also, new 70-412 VCE Dumps: http://www.passleader.com/70-412.html